The New Improved Bergahus Yeti Attak II Gaiters are the revised version of the Yeti Attak & Yeti Wilderness. They combine the success of the Wilderness gaiters with the new rand and fit of the Extrem Pro gaiters and so producing an all-round top performing gaiter to see off snow, water and mud.

Features
Gore-Tex Pro Shell Upper
Replaceable SKYWALK rubber rand
Forefoot strap
Designed to fit under the knee
Front zip with hook and loop fastened storm flap
Drawcord retainer with cord grip
Unisex Fit Tech details
Weight: 450g / 16oz

Yeti Attak Gaiters

Please note the gaiter is engineered to be tight secure fit on boots and does take some effort, some do prefer to go up a boot size.

Yeti Fitting Instructions

Establish your left and right gaiter

Pull toe of boot through the largest gap, from inside to outside of gaiter
Pull heel of gaiter onto and fully around heel of boot
This next bit is the hardest bit and may take a lot of stretching/pulling, pull to area of gaiter over toe area of boot, you may need to put heel of boot on floor and pull gaiter upwards and over boot toe (it will fit on eventually, these gaiters are supposed to be super tight so no water gets thro)
You may find easier to have help with this part (1 person wearing as the other pulls up & over - warming the rubber in hot water (Not boiling water) can help

Finally, adjust rubber accordingly so it is evenly around the sole.


Gore-Tex Pro Shell is the top end Gore-Tex fabric, designed for the more demanding conditions and comes in 2 and 3 layer varieties. Gore-Tex Pro Shell has improved abrasion resistance through a careful selection of outer fabrics, with any heat insulation layers suspended freely between the laminate and inner lining on 2 layer fabric and a special, high performance membrane and specially developed inner lining on 3 layer fabrics. Targeted at the outdoor professional Gore-Tex Pro Shell is the most hard wearing of the Gore fabrics.